You are using an 0utdated browser. Please update it to improve your experience on our site,
some features may not work normally on your version of Internet Explorer.
Close this alert.

Our products Catalog

RADIO ENERGY is
recognized worldwide
for the quality and
reliability of its
products in the
electrical field.

Its three main product lines are :

— the dynamos and tachymetric alternators, digital encoders.

— direct current motors.

— Permanent magnet generators and alternators (PMG) for various energy applications including wind power.

Radio Energie offers a wide range of speed sensors that equip all types of industrial equipment worldwide (70% for export), such as elevators, lifting cranes, mechanical elevators, rolling mills, material processing industry...

If you want more precision? Contact us!

Contact us!

Our catalog

REO 110 - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 110
Contact us
Application
  • - General use
  • - Reduced size - Very small dimensions
Description
  • - Permanent magnet excitation
  • - Armature with frontal commutator
  • - 2 external terminals connection, used as brushes-support
  • - Tapped holes fixation - B14
  • - E.M.F. 1000 rt/mn: 2V to 7V
  • - C.A. brushes
  • - IP44
REO 122 - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 122
Contact us
Application
  • - General use
  • - Reduced size - Very small dimensions
Description
  • - Permanent magnet excitation
  • - Armature with frontal commutator
  • - 2 external terminals connection, used as brushes-support
  • - Tapped holes fixation - B14
  • - E.M.F. 1000 rt/mn: 8V to 20V
  • - C.A. brushes
  • - IP44
REO 220 - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 220
Contact us
Application
  • - General use
  • - Small dimensions
Description
  • - Tachymetric Dynamo reduced size
  • - Permanent magnet excitation
  • - Outgoing cables connection
  • - Brushes accessible from the outside
  • - Tapped holes fixation - B14
  • - E.M.F. 1000 rt/mn: 5V to 12V
  • - C.A. brushes
  • - IP44
REO 315L - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 315L
Contact us
Application
  • - Industrial use
  • - Speed control and regulation
Description
  • - Terminal box or cable
  • - Magnetic circuit designed for current industrial applications
  • - Flange connection only
  • - E.M.F. 1000 rt/mn: 7V to 60V
  • - C.A. or E.G. brushes
  • - IP44 or IP55
REO 444L - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 444L
Contact us
Application
  • - Industrial use
  • - Speed control and regulation
Description
  • - Reduced size
  • - Connector connection
  • - E.M.F. 1000 rt/mn: 60V
  • - C.A. or E.G. brushes
  • - IP44 or IP55
REO 444N - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 444N
Contact us
Application
  • - Industrial use
  • - Speed control and regulation
Description
  • - Most common tachymetric dynamo
  • - Permanent magnet excitation
  • - Brushes support under hood
  • - Outgoing cable connection
  • - Low ripple rate
  • - 1 or 2 commutators
  • - B3 or B5 mount
  • - E.M.F. 1000 rt/mn: 6V to 200V
  • - C.A. or E.G. brushes
  • - IP44 or IP55
REO 444R (Very robust model) - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 444R
Contact us
Application
  • - Industrial use
  • - Speed control and regulation
Description
  • - High quality signal
  • - Terminal box connection
  • - Possibility to mechanically combine with encoder, or centrifugal switch (Combino)
  • - 1 or 2 collectors
  • - B3, B5 or B35 mount
  • - E.M.F. 1000 rt/mn: 6V to 200V
  • - C.A. or E.G. brushes
  • - IP54 ou IP56
REO 444SR - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 444SR
Contact us
Application
  • - Railway equipment
Description
  • - Model derived from REO 444R, except adapted to railway conditions (embedded material)
  • - Only flanged version, only 1 commutator
REO 444US - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 444US
Contact us
Application
  • - Industrial use
  • - Speed control and regulation
Description
  • - Model derived from REO 444R, but adapted to North American business
  • - UL & CSA approved
REO 588 - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 588
Contact us
Application
  • - Industrial use
  • - Low speeds use
Description
  • - Low ripple rate tachymetric dynamo
  • - Permanent magnet excitation
  • - Terminal box connection
  • - 1 or 2 collectors
  • - B3, B5 or B35 mount
  • - E.M.F. 1000 rt/mn: from 30V to 1000V
  • - C.A. or E.G. brushes
  • - IP54 or IP56
REO 588 MF - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 588MF
Contact us
Application
  • - Industrial use
  • - Low speeds use
Description
  • - Model derived from our REO 588 tachymetric dynamo
  • - Reinforced mechanic
  • - Direct connection on shaft
REO 588SR - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 588SR
Contact us
Application
  • - Difficult railway conditions
  • - Embedded railway material
Description
  • - Model derived from REO 588 tachymetric dynamo
  • - Reinforced construction
  • - Waterproof
  • - Very robust
  • - Only flanged version with only 1 collector
REO 588US - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 588US
Contact us
Application
  • - Industrial use
Description
  • - Model derived from tachymetric dynamo
  • - Adapted to North American business
  • - Only 1 collector
  • - UL & CSA approved model
REO 695 - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 695
Contact us
Application
  • - Industrial use
  • - Low speeds use
Description
  • - Designed for low speeds
  • - Permanent magnet excitation
  • - Voltage gradient higher than our model REO 588
  • - 1 or 2 collectors versions
  • - B3, or B5 mounting
  • - E.M.F. 1000 rt/mn: 50V to 2000V
  • - C.A. or E.G. brushes
  • - IP44
  • - Only on request
REO 695MF - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 695MF
Contact us
Application
  • - Industrial use
  • - Low speeds use
Description
  • - Model derived from our tachymetric dynamo REO 695
  • - Direct connection on shaft
  • - Only 1 collector
  • - Only on request
REO 703 & 733 - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 703 & 733
Contact us
Application
  • - Industrial use
  • - Very Low speeds use
Description
  • - Tachymetric dynamo suitable for low speeds
  • - Permanent magnet excitation
  • - 1 or 2 collectors versions
  • - Model REO 733 very low ripple rate
  • - B3 or B5 mount
  • - E.F.M. at 1000 rt/mn: 60V to 4000V
  • - C.A. or E.G. brushes
  • - IP44
  • - Only on request
REO 703 & 733MF - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 703 & 733MF
Contact us
Application
  • - Industrial use
  • - Very Low speeds use
Description
  • - Model derived from our tachymetric dynamos 703 & 733
  • - Reinforced mechanic
  • - Direct connection on shaft
  • - Only 1 collector
  • - Only on request
REO 820 - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 820
Contact us
Application
  • - Heavy industrial use
  • - Very Low speeds use
Description
  • - Model designed for low speed, high flow or high tension
  • - Permanent magnet excitation
  • - Only 1 collector
  • - B3 or B5 mount
  • - E.F.M. at 1000 rt/mn: 200V to 6000V
  • - C.A. or E.G. brushes
  • - IP44
  • - Only on request
REO 820MF - Tachymetric Dynamos - Outgoing shaft
Product reference
REO 820MF
Contact us
Application
  • - Heavy industrial use
  • - Very Low speeds use
Description
  • - Model derived from our tachymetric dynamo REO 820
  • - Direct connection on shaft
  • - Only 1 collector
  • - Only on request
RDC 205 - Tachymetric Dynamos - Blind shaft
Product reference
RDC 205
Contact us
Application
  • - Industrial use
  • - Machine tool - Robotics
Description
  • - Tachymetric Dynamo composed of rotor/stator
  • - Permanent magnet excitation
  • - Rotor mounted on smooth shaft
  • - Small sized
  • - Collector mounted opposite side of connection
  • - Copper collector
  • - E.M.F. 1000 rt/mn: 2V to 10V
  • - Shaft diameter from 6 to 12.7mm
  • - IP00
  • - CSA Certified
RDC 206 - Tachymetric Dynamos - Blind shaft
Product reference
RDC 206
Contact us
Application
  • - Industrial use
  • - Machine tool - Robotics
Description
  • - Tachymetric Dynamo composed of rotor/stator
  • - Permanent magnet excitation
  • - Rotor mounted on smooth shaft
  • - Small sized
  • - Collector mounted opposite side of connection
  • - Copper collector
  • - E.M.F. 1000 rt/mn: 10V to 20V
  • - Shaft diameter from 6 to 12.7mm
  • - IP00
  • - CSA Certiified
RDC 207 - Tachymetric Dynamos - Blind shaft
Product reference
RDC 207
Contact us
Application
  • - Industrial use
  • - Machine tool - Robotics
Description
  • - Tachymetric Dynamo composed of rotor/stator
  • - Permanent magnet excitation
  • - Rotor mounted on keyway or smooth shaft
  • - E.M.F. 1000 rt/mn: 10V to 30V
  • - Shaft diameter from 12 to 16mm
  • - IP00
RDC 208 - Tachymetric Dynamos - Blind shaft
Product reference
RDC 208
Contact us
Application
  • - Industrial use
  • - Machine tool - Robotics
Description
  • - Tachymetric Dynamo composed of rotor/stator
  • - Permanent magnet excitation
  • - Rotor mounted on keyway or smooth shaft
  • - E.M.F. 1000 rt/mn: 30V to 60V
  • - Shaft diameter from 12 to 16mm
  • - IP00
RDC 210 - Tachymetric Dynamos - Blindshaft
Product reference
RDC 210
Contact us
Application
  • - Industrial use
  • - Machine tool - Robotics
Description
  • - Permanent magnet excitation
  • - Collector mounted opposite side of connection
  • - Multiple manufacturing variants (IP00, IP44, IP68)
  • - Reduced length
  • - E.M.F. 1000 rt/mn: 5V to 20V
  • - Shaft diameter from 8 to 16mm
  • - CSA certified
RDC 215 - Tachymetric Dynamos - Blind shaft
Product reference
RDC 215
Contact us
Application
  • - Industrial use
  • - Machine tool - Robotics
Description
  • - Tachymetric Dynamo composed of rotor/stator
  • - Permanent magnet excitation
  • - Multiple manufacturing variants (IP00, IP44, IP68)
  • - Collector mounted opposite side of connection
  • - E.M.F. 1000 rt/mn: 10V to 60V
  • - Shaft diameter from 8 to 16mm
  • - CSA certified
RDC 14 - Tachymetric Dynamos - Blind shaft
Product reference
RDC 14
Contact us
Application
  • - Industrial use
  • - Machine tool - Robotics
Description
  • - Tachymetric Dynamo composed of rotor/stator
  • - Permanent magnet excitation
  • - Robust machine
  • - Collector mounted same side that connection
  • - Mounted on smooth shaft with deformable hub
  • - C.A. or E.G. brushes
  • - E.M.F. 1000 rt/mn: 10V to 60V
  • - Shaft diameter from 6 to 12.7mm
  • - IP44
RDC 16 - Tachymetric Dynamos - Blind shaft
Product reference
RDC 16
Contact us
Application
  • - Industrial use
  • - Machine tool - Robotics
Description
  • - Tachymetric Dynamo composed of rotor/stator (full metal)
  • - Permanent magnet excitation
  • - Collector mounted opposite side that connection
  • - Mounted on smooth shaft
  • - C.A. or E.G. brushes
  • - E.M.F. 1000 rt/mn: 10V to 60V
  • - Shaft diameter from 8 to 16mm
  • - MF (IP44) or ME (IP55)
RDC 30 - Tachymetric Dynamos - Blind shaft
Product reference
RDC 30
Contact us
Application
  • - Industrial use
Description
  • - Tachymetric dynamo composed of rotor/stator (BF)
  • - Bearing variant is floating mount blind shaft (MF)
  • - Large reaming
  • - Permanent magnet excitation
  • - E.M.F. 1000 rt/mn: 10V to 60V
  • - Shaft diameter from 17 to 30mm
  • - IP44
RSB - Tachymetric dynamos without brushes
Product reference
RSB
Contact us
Application
  • - Industrial use
  • - 100 RS (Rotor/Stator)
  • - 112 RS (Rotor/Stator)
  • - 114 AS (Sur palier)
  • - 144 AS (Sur palier)
Description
  • - Umax +/- 10 V
  • - Speed range 50 - 10000 rt/mn
  • - Synchro phased output
  • - Frequency at 1000 rt/mn 66.6 Hz
  • - RSB 100 & 112 protection - IP56
  • - RSB 114 & 144 protection - IP55
  • - Operating temperature -10°C + 70°C
  • - Only on request
RYO 010 - Tachymetric Alternators - Outgoing Shaft
Product reference
RYO 010
Contact us
Application
  • - Metallurgy
Description
  • - Homopolar with statoric armature
  • - Phased winding
  • - Permanent magnet excitation
  • - Rotor including modulation poles (with no rings nor brushes)
  • - E.M.F . 1000 rt/mn 8V
  • - 100 Hz at 1000 rt/mn
  • - Flange mounting
  • - IP33 or IP54
RSYO 615 - Tachymetric Alternators - Outgoing Shaft
Product reference
RSYO 615
Contact us
Application
  • - Metallurgy
Description
  • - Homopolar with statoric armature
  • - UK Bobinage monophasé
  • - Permanent magnet excitation
  • - Rotor including modulation poles (with no rings nor brushes)
  • - E.M.F . 1000 rt/mn: 1.7V to 40V
  • - 100 Hz at 1000 rt/mn
  • - Flange mounting
  • - IP32
RSYO 615 &1515 - Tachymetric Alternators - Outgoing Shaft
Product reference
RYO 615 & 1515
Contact us
Application
  • - Metallurgy
Description
  • - Homopolar with statoric armature
  • - Phased winding
  • - Permanent magnet excitation
  • - Rotor including modulation poles (with no rings nor brushes)
  • - E.M.F . 1000 rt/mn: 17V
  • - 100 Hz at 1000 rt/mn (RYO 615)
  • - 250 Hz at 1000 rt/mn (RYO 1515)
  • - Flange mounting
  • - IP32
  • - Only on request
Y32- Tachymetric Alternators - Outgoing Shaft
Product reference
Y 32
KONICA MINOLTA DIGITAL CAMERA
Contact us
Application
  • - Metallurgy
Description
  • - Homopolar with statoric armature
  • - Phased winding
  • - Permanent magnet excitation
  • - Rotor including modulation poles (with no rings nor brushes)
  • - E.M.F . 1000 rt/mn: 50V to 125V
  • - 200 Hz at 1000 rt/mn (RYO 615)
  • - Flange mounting
  • - IP53 or IP55
Y1 20 & Y1 32- Tachymetric Alternators - Outgoing Shaft
Product reference
Y1 20 & Y1 32
Contact us
Application
  • - Railway construction
Description
  • - Homopolar with statoric armature
  • - Monophased or threephased winding
  • - Permanent magnet excitation
  • - Rotor including modulation poles (with no rings nor brushes)
  • - 200, 400, 500 & 1000 Hz at 1000 rt/mn
  • - Flange mounting
  • - IP55
ZI - Tachymetric Alternators - Outgoing Shaft
Product reference
Z1
Contact us
Application
  • - Paper mill
Description
  • - Homopolar with statoric armature
  • - Phased or threephased winding
  • - Oriented permanent magnet excitation (Ticonal)
  • - Rotor including modulation poles (with no rings nor brushes)
  • - E.F.M. at 1000 rt/mn 50V
  • - 133 1/3 , 400 & 1000 Hz at 1000 rt/mn in 1-
  • - 133 1/3 , 333 1/3 , 400, 533 1/3 , 666 2/3 & 1000 Hz at 1000 rt/mn in 3-
  • - Standard flange mounting, normalized flange, and/or fixing tabs
  • - IP53, IP55
SOUND WHEEL - Tachymetric Alternators - Outgoing Shaft
Product reference
SOUND WHEEL
KONICA MINOLTA DIGITAL CAMERA
Contact us
Application
  • - Industrial use
Description
  • - This sensor allows numerical detection of rotating speed
  • - Associated with a REO 588 tachymetric Dynamo or higher ranged, such assembly allows to get power provided by the Tachometer, but also low current/high frequency
  • - Grooved rotor 240 teeth
  • - E.F.M. at 1000 rt/mn 2V
  • - 4000 Hz at 1000 rt/mn
  • - Flange or base mounting
  • - IP53, IP54
RAC 12D - Tachymetric Alternators - Outgoing Shaft
Product reference
RAC 12D
Contact us
Application
  • - Industrial use
  • - Control & Regulation
Description
  • - Threephased tachymetric alternator, rectifier included
  • - Designed for current industrial uses
  • - Only Rotor/stator execution
  • - E.M.F. 1000 rt/mn 30V to 300V
  • - IP56
PMG - IEC
Contact us
Application
  • - Normalized machine
  • - Master key solution
  • - Very common product
Description
  • - Monophased or Threephased
  • - Voltage below or equal to 500V
  • - Electrical power below or equal to 60 kVA
  • - Frequency below or equal to 400Hz
  • - Power factor (Cos Phi) between 0 and 1
  • - Distorsion below or equal to 5%
  • - Speed below or equal to 5000 rt/mn
  • - Possibility to design some PMG dedicated to principal generators 50 Hz & 60 Hz
  • - IP 44 or IP 55
  • - Insulation Class F
  • - Heating class F or B: 100K or 80 K
  • - Ambient temperature: 40°C or else
PMG - MF
Product reference
Plate solution
Contact us
Application
  • - Applicable solution if turbine drive
  • - Key master machine
  • - Customer’s shaft directly adapted and mounted on PMG flange
  • - Closed plates machine
  • - Anti-rotate shaft blocks PMG rotation
Description
  • - Monophased or Threephased
  • - Voltage below or equal to 500V
  • - Power below or equal to 60 kVA
  • - Frequency below or equal to 400Hz
  • - Power factor (Cos Phi) between 0 and 1
  • - Distorsion below or equal to 5%
  • - Speed below or equal to 5000 rt/mn
  • - Possibility to design some PMG dedicated to principal generators 50 Hz & 60 Hz
  • - IP 44 ou IP 55
  • - Insulation Class F
  • - Heating class F or B: 100K or 80 K
  • - Ambient temperature: 40°C or else
PMG - MF
Product reference
Hollow shaft solution
Contact us
Application
  • - This machine is directly mounted on customer’s machine shaft
  • - Bearings less solicited as PMG stands on customer’s shaft
Description
  • - Monophased or Threephased
  • - Voltage below or equal to 500V
  • - Power below or equal to 60 kVA
  • - Frequency below or equal to 400Hz
  • - Power factor (Cos Phi) between 0 and 1
  • - Distorsion below or equal to 5%
  • - Speed below or equal to 5000 rt/mn
  • - Possibility to design some PMG dedicated to principal generators 50 Hz & 60 Hz
  • - IP 00
  • - Insulation Class F
  • - Heating class F or B: 100K or 80 K
  • - Ambient temperature: 40°C or else
PMG R/S
KONICA MINOLTA DIGITAL CAMERA
Contact us
Application
  • - Stripped but intelligent solution adapted to customer’s mechanical reality
  • - Customized mechanics allowing high power condition
  • - Adaptation directly on customer’s mechanical support
  • - Solution fitting with diesel drive as withstanding vibrations
  • - Adapted solution for ALNICO magnet use
Description
  • - Monophased or Threephased
  • - Voltage below or equal to 500V
  • - Power below or equal to 60 kVA
  • - Frequency below or equal to 400Hz
  • - Power factor (Cos Phi) between 0 and 1
  • - Distorsion below or equal to 5%
  • - Speed below or equal to 5000 rt/mn
  • - Possibility to design some PMG dedicated to principal generators 50 Hz & 60 Hz
  • - IP 00
  • - Insulation Class F
  • - Heating class F or B: 100K or 80 K
  • - Ambient temperature: 40°C or else
In progress
Contact us
Permanent magnet motors
Product reference
Série A
Contact us
Application
  • - Industrial use
Description
  • - Ferrite magnets
  • - Shaft size from 40 to 63
  • - According to IEC standards
  • - Voltage from 12 to 150V
  • - Max speed 5000 rt/mn
  • - Power from 10 to 700W
  • - IP44 et IP55
  • - Construction type B3, B14 or B5
  • - Insulation Class F
  • - Heating Class F
  • - Option: Tachymetric dynamo
  • - Option : Encoder
  • - Option: Brake
Variable speed motors
Product reference
Série V
Contact us
Application
  • - Industrial use
  • - Tough environments
Description
  • - Shaft size from 63 to 200
  • - According to IEC standards
  • - Speed from 750 to 4000 rt/mn
  • - Power from 0.05 to 55 kW
  • - IP23
  • - Mounting type B3, B5 or B35
  • - Insulation Class F
  • - Heating Class F
  • - Service type S1
  • - Ambient temperature 40°C
  • - Option: Tachymetric dynamo
  • - Option : Encoder
  • - Option: Brake
  • - To be defined when ordering: armature voltage, excitation voltage and armature voltage form factor
Variable speed motors
Product reference
Série F
Contact us
Application
  • - Industrial use
  • - Tough environments
Description
  • - Shaft size from 63 to 200
  • - According to IEC standards
  • - Speed from 750 to 3000 rt/mn
  • - Power from 0.04 to 18kW
  • - IP44 and IP55
  • - Mounting type B3, B5 or B35
  • - Insulation Class F
  • - Heating Class F
  • - Service type S1
  • - Ambient temperature 40°C
  • - Option: Tachymetric dynamo
  • - Option : Encoder
  • - Option: Brake
  • - To be defined when ordering: armature voltage, excitation voltage and armature voltage form factor
Variable speed motors
Product reference
Série FV
Contact us
Application
  • - Industrial use
  • - Tough environments
Description
  • - Shaft size from 90 to 200
  • - According to IEC standards
  • - Speed from 750 to 3000 rt/mn
  • - Power from 0.22 to 40kW
  • - IP44 and IP55
  • - Mounting type B3, B5 or B35
  • - Insulation Class F
  • - Heating Class F
  • - Service type S1
  • - Ambient temperature 40°C
  • - Option: Tachymetric dynamo
  • - Option : Encoder
  • - Option: Brake
  • - To be defined when ordering: armature voltage, excitation voltage and armature voltage form factor
SERAMEL motors
Product reference
Série S
Contact us
Application
  • - Secured zone
  • - ATEX certification according to 2014/34/UE directive for ATEX zone use
  • - Possibility to repair ATEX motors according to Saqr-ATEX
Description
  • - Our motors are conceived according to CENELEC European standards, and designed to offer safety and reliability high level
  • - Shaft size from 71 to 160
  • - Temperature class T4 (135°C) and T5 (100°C)
  • - Ambient temperature from -20°C to +80°C
  • - Motor design including compensated poles: 2 or 4
  • - IP44 and IP55
  • - Cooling IC 0141
  • - Cast iron element (except S71 range: Aluminium)
  • - Mounting type B3, B14, B5, B35 and V1
  • - Battery power supply: 24V, 48V, 110V and 220V
  • - Variator power supply: 230V-50Hz or 400V - 50Hz
  • - Excitation type: separated, shunt, series or compound
  • - Service type S1
  • - Form factor: Ff1
  • - Insulation Class F
  • - Heating Class F
  • - Power from 0.130 to 20 kW
Legal notices — Copyright © 2024 — Website design by Pixelus
Menu
Contact
Close